26th Feb, 2015
This new 4K2K 4 by 4 Matrix with fast switch and control system allows 4 HDMI signal sources displayed in 4 connected HDMI displays in the way you like and with fast switching technology the device can greatly eliminate the time required by swapping or turning ON/OFF the connected displays.
24th Feb, 2015
The newest 8 by 8 HDMI 4K2K Matrix over CAT5e/6/7 is the most powerful HDMI 4K2K Martrix which supports the transmission of video (resolutions up to 4K2K Full HD & HDCP 2.2), multi-channel digital audio and control via IR, RS-232, Telnet or Web GUI from eight high definition sources to eight outputs over a single CAT5e/6/7 cable (up to 100m) for each output.
22nd Jan, 2015
New 1 by 2 HDMI UHD Splitter with HDCP 2.2 is an advanced solution for splitting a single HDMI input to two HDMI outputs. It provides high performance audio and video output through HDMI cables up to 4K2K@60Hz (YUV420) resolution and is capable of receiving and transmitting up to 9Gbps of bandwidth with no data loss. Supporting the latest features you can be assured of reliable and high quality HDMI distribution.
15th Jan, 2015
New 1 by 4 HDMI UHD Splitter is an advanced solution for splitting a single HDMI input to four HDMI outputs with HDCP 2.2. It supports high performance audio and video output through HDMI cables which can accept up to 4K2K@60Hz (YUV420) resolution and is capable of receiving and transmitting up to 9Gbps of bandwidth without data loss. This mordern advanced technology HDMI UHD splitter supports latest features you can be assured of reliable and high quality HDMI distribution.
15th Jan, 2015
New 6 by 2 HDMI Matrix with Fast Switching the latest development multi-HDMI video and audio signal selection and switching. HDMI signal from any of its 6 sources to be routed to and displayed on any of its 2 connected HDMI displays simultaneously with View All Mode and Picture-in-picture (PIP) supported. With fast switching technology the device can greatly eliminate the time required by swapping or turning ON/OFF the connected displays. It supports 4K2K, 3D, 30-bit Deep Color, Hi-Def audio and other features defined by HDMI specifications. The management of source/sink scenarios can be operated easily through on-panel buttons, IR remote control, RS-232 or Ethernet protocol.
12th Jan, 2015
New 1 by 4 HDMI TV Wall Splitter is a convenient device allowing an HDMI 4K2K input source to be freely arranged on 4 displays (TV or monitor) with bezel correction function. Friendly control application that leads and leave the TV Wall control system never been easier. The device supports video timings up to WUXGA@60RB and 1080p@60Hz, audio format up to 7.1CH LPCM at 192kHz sampling rate based on input source EDID. All the operation and control can be done through Telnet and RS-232.
23rd Dec, 2014
New HDMI 4 In 4 Out Matrix with 4k2k allows four HDMI video source signals to be connected to four HDTV monitors. Each monitor can display a different HDMI source signal, or all four (4) monitors can display the same HDMI source signal… or you can select any combination of source signal to monitor, as suits. All inputs support 480i/p~1080i/p@60Hz, all 3D formats, 48-bit Deep Colour and UHD 4k2k. Only Output D is designed to support UHD 4k2k signalling and an UHD 4k2k TV must be connected to this output when inputting 4k2k video. Full support also given for digital audio LPCM 2CH~7.1Ch, Dolby TrueHD and DTS-HD Master Audio.
11th Nov, 2014
New Ultra High Definition HDMI 4k2k 4 input 1 output Switch is the latest development in multi-HDMI video and audio signal selection and switching. With in-built “fast-switching” technology, the lag-time between selecting and displaying an HDMI video signal is noticably reduced. Full support given for HDMI resolutions from 480i/p to 1080i/p, all 3D formats, UHD 38402160 & 40962160 and 36-bit Deep Colour. Support also for Digital audio formats like LPCM 2CH to 7.1CH, Dolby Digital 2 to 5.1, Dolby TrueHD and DTS-HD Master Audio.
23rd Oct, 2014
New DVI-D to PAL NTSC Composite Video Scan Converter is designed to convert a Digital DVI-D video signal to an Analog PAL or NTSC Composite video signal. Ideal for viewing new technology digital video on older analog TV screens or monitors. Full support for DVI PC resolutions from VGA to WUXGA@60Hz(RB) and DVI HD resolutions from 480p@60Hz, 576p@50Hz and 720p@50/60Hz up to 1080i/p@50/60Hz.
10th Oct, 2014
The price for our quality PC HD to DVI-D converter ID#731 has been reduced to a crazy $181.00 Australian Dollars, inclusive of GST (approximately $145.00 US). Save over AU$55.00 off RRP for this quality format converter. The PC HD to DVI-D converter is designed to accept Analog PC input resolutions VGA thru WUXGA@60Hz and Analog Component HD input resolutions 480i/p thru 1080i/p and then convert that signal to an equivalent HDMI HD resolution output. The output resolution of the PC HD to DVI-D converter follows input resolution, so if you input Component HD 1080p, then the converter outputs in HDMI HD 1080p.
08th Oct, 2014
Converters.TV has a range of ‘Floor Stock’ and ‘Used’ Video signal converter models that are marked down to sell fast! Most products are advertised for less than half their original price! All units certified as being in A1 working condition, with three(3) and six(6) month Warranty supplied. All accessories included. Be smart and snap up these great bargains while they last!
02nd Oct, 2014
Half price PC VGA WUXGA to Video Converters are now on Sale and selling for US Seventy-Five dollars ($75.00) at Converters.TV, a HUGE saving of US Seventy-Five dollars ($75.00) off our advertised price! A high quality video scaler and format converter of Computer VGA resolutions to a standard Interlaced video signal in Composite TV (RCA connector) and S-video TV (4 pin DIN connector) video modes. Superior chip-sets deliver a pixel-perfect video reproduction of all standard Computer resolutions from VGA through to wide-screen WUXGA. The PC VGA WUXGA to Video Converter has the added bonus of being able to select the Composite and S-video output video signal to be of PAL or NTSC format.
26th Sep, 2014
Multi-Frequency Industrial LCD (Liquid Crystal Display) monitors from Delta are reliable, good quality and very good value for your dollars. Various size Industrial LCD monitors designed for the retro-fit of out-dated CRT (Cathode Ray Tube) screens in CNC machines and Arcade Game Cabinets. Available monitor sizes include ten, twelve, fifteen, seventeen and nineteen inch. We also have eight inch, as well as twenty-six and thirty-two inch widescreen available, different brand. Designed to detect old Technology Analog CGA (15kHz) and EGA (24kHz) RGB video signal timings, the Delta monitor’s on-board graphic IC’s up-scale the signal to a VGA (31kHz) timing for crystal clear, fully Digital viewing.
17th Sep, 2014
New HDMI 4k2k 1x2 SD-HD Scaler is a convenient one input, two output device for connection of 4k2k Ultra High Def (UHD) video signals into High Def (HD) video equipment for ‘Scaled’ viewing on HDMI screens. It also ‘Bypasses’ the 4k2k signal for connection to a 4k2k enabled monitor. With the advantage of being a SD/HD video Scaler, all selectable output resolutions are accessible by an On Screen Display (OSD) menu. You can even adjust the HDMI 4k2k 1x2 SD-HD Scaler’s output settings for picture size and display quality to best match your TV. Compact, user friendly and perfect for expansion of any Home Theatre system.
26th Aug, 2014
Now transmit Composite Video or PC RGB signals over a CAT5e/6/7 cable using our new release HDBaseT PC/CV to HDMI Scaler Format Converter over CAT5e/6/7 Transmitter (with 5 Play Convergence). Send Composite Video or PC RGB signals along a single CAT5e/6/7 cable up to a distance of 100m without loss or degradation to the transmitted signal. At the remote end, the CV or PC line signal is upscaled to a selectable standard or high definition PAL or NTSC HDMI signal using a compatible HDBaseT Receiver, for easy HDMI cable connection to your HDTV.
20th Aug, 2014
The HDMI, DisplayPort, VGA 3D-2D Scaler with 3D Bypass video processor allows any 3D movie to be viewed on any 2D display. It will scale VGA, component, HDMI and DisplayPort resolutions, plus Frame-Packing, Top-and-Bottom and Side-by-Side 3D formats to an acceptable HDMI HD resolution for display on your 2D HDTV. Input a 3D video signal via HDMI or DisplayPort cable and scale the signal to display out at selectable 480p, 720p or 1080p HD resolution. PC resolutions from VGA timing thru to UXGA timing are also accepted and scaled to HDMI HD resolutions. Very easy to setup and operate.
15th Aug, 2014
New range of cost effective HDMI Scalers and Format converters are now available from our on-line Converters.TV store. New models are compact in design with sleek styling for ease of use. Functional up/down scaling and PAL/NTSC format conversion technology are in-built and accessible by OSD menu. Convert standard definition video to high definition video, and vice-versa, using the converters on-screen display function. Convert PAL video to NTSC video, or NTSC video to PAL video with the push of a button. Enhance your viewing pleasure and utilise the full capabilities of your TV and video source equipment by using our HDMI Scalers and Format converters.
08th Aug, 2014
Touch Screen User Interface technology is now in-built to our new range of Delta Multi-frequency Industrial LCD panels. This new range of Delta CGA, EGA to VGA LCD panels (with touch screen) are especially ideal for use in CNC machinery and Arcade Game cabinets, interfacing user commands into direct action commands with just the tap of your fingertip on glass. Adding a touch screen to a Delta multi-frequency Industrial LCD panel makes for easier navigation around the LCD screen and more direct control of source equipment applications.
07th Aug, 2014
Trying to replace your old CRT monitor with a new LCD screen? Your old video signal does not display correctly, or even at all, on the new LCD screen? You really need our RGB MDA, CGA, EGA to VGA Converter to detect and display the old video signal on new LCD screens. It does not matter if your source video signal is an old Monochrome B&W, 16 colour CGA, 64 colour EGA or 256 colour and higher VGA signal, the RGB MDA, CGA, EGA to VGA Converter is designed to automatically detect and lock to that signal.
16th May, 2014
New HDBaseT and HDBaseT-Lite technology now available for long distance transmission of uncompressed HDMI video and audio signals along Category 5e, 6 and 7 data cables. The device is able to transmit and receive Full HD 1080p Digital video and audio signals using the HDBaseT protocol for line transmission, with distances of up to 100m achievable without any signal loss or degradation. One CAT5e/6/7 cable is all that is required to connect from the Source transmitter unit to the Remote receiver unit. Supports PAL and NTSC video formats.
30th Apr, 2014
The Video to HDMI-VGA Scaler Format Converter is a quality video processor designed to convert standard and high definition video to a selectable HDMI, Component or VGA high definition output. Using the latest technology algorithms for enhanced video processing and on-board OSD menu for setup, the Video to HDMI-VGA Scaler Format Converter is ideal for interfacing old and new video technologies.
11th Apr, 2014
The HDMI Displayport VGA 3D to 2D Scaler w/3D Bypass is designed to accept any 3D movie format and scale it to HDMI resolution for 2D displays. When 3D to 2D conversion is not required, the 3D signal is passed thru unformated. The device is easily setup and controlled by on-panel buttons, IR remote control or RS-232 PC protocol. It accepts various HD, HDMI and Component, 3D, DisplayPort, and VGA resolutions; and you can select the best HD output resolution to suit your HDTV. For 3D replay of 3D signals, this still requires 3D source(player) and sink(TV) to be connected.
11th Mar, 2014
The HDMI Quad 4x4 Video Wall Matrix Switch is designed to utilise 4 HDMI video sources, such as Blu Ray players, XBox, PS3, etc. and to display any or all of the 4 video sources onto four HDMI input LCD, LED, or Plasma monitors/TVs. Display the desired video signal on to the monitors in different formats using various switch modes, including ‘Video Wall’ mode. Ideal for use in Advertising displays, Educational lectures, Commercial and Industrial applications and it is also perfect for integration with your Home Theatre setup.
11th Mar, 2014
The Analog Digital Audio to HDMI Inserter Bridge is designed to allow an external analog or digital audio source signal to be streamed and played on an HDMI enabled HDTV or Sound system. This ‘stand alone’ function means that it is not necessary to have the Video component of the HDMI stream present. There is no software required to interface and listen to ‘audio only’ using HDMI video and audio technology.
11th Mar, 2014
The HDMI & IR Transmitter and Receiver over ONE CAT6 is a tool for extending your HDMI & IR signal over long distances to a compatible display and is now in stock. Instead of using expensive HDMI cables, your existing CAT6 cables/sockets can be utilized to perform functions like transferring 8 bits/color video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a bandwidth up to 165MHz.
11th Mar, 2014
The USB Audio Center allows multiple digital and analog audio sources to be controlled and switched to attached audio equipment like active speakers, an Amplifier or headphones. Select and play audio files stored on your PC, or connect an external analog stereo Left/Right audio source to ‘Line In’ of the USB Audio Center. Connect active speakers or an audio amplifier to the ‘Line Out’ of the USB Audio Center for perfect sound reproduction of your selected music. A headphone output connection is also available for private quiet time listening.
11th Mar, 2014
The HDMI v1.3 1 In 8 Out 2D-3D Splitter is our latest multi output HDMI splitter that will also work with 3D video signals. Connect a 2D or 3D HDMI/DVI video source to the input and connect eight standard or 3D capable HDTVs to the outputs. The splitter auto-detects the type of signal, 2D or 3D, and displays to each connected monitor accordingly. Also gives full support to digital audio formats such as LPCM 7.1CH; Dolby TrueHD, Doly Digital Plus and DTS-HD Master Audio with sampling rates 32kHz ~ 192kHz.
21st Jan, 2014
The HDMI ARC to Analog Audio Converter is designed to take the ARC signal (Audio Return Channel signal) out of the HDTV and extend this signal to active external speakers or Amplifier system. Operates with any standard HDMI LPCM 2CH audio signal with sampling rates up to 192kHz. Ideal for extending the video’s audio track from the HDTV ARC port to your stereo system without loss of signal quality or video/audio timing mis-match.
14th Jan, 2014
The Optical to Analog Audio Converter with Dolby Digital Decoder is the latest Digital to Analog audio converter available from our Converters.TV store. Designed with an in-built Dolby Digital Decoder to ensure perfect digital/analog audio conversion, without signal loss or distortion. Supports uncompressed LPCM 2CH audio sampling rates from 32kHz to 96kHz (32, 44.1, 48, 88.2 and 96kHz) plus Dolby Digital 5.1CH audio sampling rate 48kHz.
10th Oct, 2013
Component HD to Video Converter has been upgraded to now accept both progressive and interlaced Component video signals. It will accept from 480i/p, 576i/p, 720p and 1080i/p resolution. Ideal for operation with both old and new technology Component interlaced and progressive video, converting all to composite and super video output. It will accept both PAL (50Hz) and NTSC (60Hz) video format input and output format can be selected between PAL or NTSC.
03rd Oct, 2013
Multi Format Video to USB HD Capture Box is designed to convert a standard video signal to USB High Definition signal for recording using PC based software. Record your video into PC file formats of H.264 / MPEG4-AVC standards. Fully compatible with PAL and NTSC video formats, the Multi Format Video to USB HD Capture Box is ideal for converting SD video to a HD resolution for recording.
23rd Sep, 2013
Did you know that Converters.TV is on Facebook? We have joined this social media website to provide updates on the company, industry news, special offers and to get to know our customers better. To like our page please go to www.facebook.com/Arcade-Spare-Parts or follow this link
08th Aug, 2013
New HDMI v1.4 Switch 4 input 1 output is the latest HDMI switch supporting all the latest Version 1.4 HDMI features. Including full support for all 3D video formats, VGA resolutions up to WUXGA and High Def up to 1080p 12/24/30/36 Bit Deep Colour, other Version 1.4 features include Audio Return Channel (ARC), Consumer Electronic Control (CEC) and Extended Display Identification Data (EDID) controls. The HDMI v1.4 Switch 4 input 1 output is fully HDCP and DVI compliant and works with both PAL and NTSC video formats. All this ensures fast switching between inputs for smooth and uninterrupted viewing of video sources.
26th Jul, 2013
DVI to DVI Scaler Box is ideal for the scaling up or down of a DVI source signal to best match the connected DVI display monitor. Accepts PC and SD/HD DVI resolutions from VGA ~ WUXGA and 480i/p ~ 1080i/p and outputs switch selectable PC WXGA or WUXGA and HD 720p or 1080p resolution. With automatic input detection of the source DVI signal and a hot-key switch for output resolution selection, this makes the installation and set up of the DVI to DVI Scaler Box extremely simple. Also fully compatible with HDMI sources and sinks (monitors) by using an HDMI to DVI cable or converter.
05th Jul, 2013
Converters.tv can save you a massive 17% off the last two DVI over CAT5e/6 Transmitter and Receiver devices in store.
23rd May, 2013
The PC and Video System Overlay Processor is designed to overlay PC (personal computer) text or graphics onto a Composite or Super Video screen image. However, with this new model you can also overlay CV or SV graphics onto a PC screen image. Enhance your screen presentations with the ability to mix images from various sources onto the one screen. The PC and Video System Overlay Processor can be used with any screen or monitor that supports PC/VGA or CV/SV video input.
14th May, 2013
Converters.tv now has their hugely popular LCD panel series back in stock, as well as the more economical DELTA monitor alternative, and are immediately available for purchase.
23rd Apr, 2013
Converters.tv now has Multi Video to HDMI and VGA Scaler Format Converters in stock and available immediately.
18th Apr, 2013
The HDMI Quad 4x4 Video Wall Matrix Switch is now in stock and available immediately. This device allows four different HDMI video sources, such as Blu Ray players, XBox, PS3, etc, to be displayed on any or all of the four HDMI display sources such as, an LCD, LED or Plasma monitor/TV.
09th Apr, 2013
Converters.tv currently have in stock a series of HDMI v1.4 4Kx2K 3D Splitters that are available immediately and on special. The splitters come in a range of 1 input with 2 outputs, 1 input with 4 outputs, and 1 input with eight outputs.
02nd Apr, 2013
The HDMI over CAT 5 & CAT 6 with Infrared ports (IR & RS 232) is now in stock and available. The HDMI over CAT 5 & CAT 6 transmits uncompressed video and audio signals over extended distances of up to 60m at 1080p@50/60Hz with no loss of quality in sound or visual.
11th Mar, 2013
New 19 Inch Delta CGA EGA Multi-frequecy to SXGA LCD Panel has now arrived into stock and is available through our Converters.TV website. Full 16.7Mb colour range upto SXGA resolution. Accepts various RGB CGA, EGA and VGA timings with Separate Sync (H+V), Combined Sync (HV) and Sync on Green (SoG) signals. Open frame design allows for easy retrofit into most enclosures and connection to the source signal is via VGA cable and a special adaptor RGB PCB Interface board. Ideal to use as a replacement LCD panel for older CRT panels in factory CNC machinery and Arcade Game Machines.
20th Feb, 2013
The Coaxial/Optical to R/L Audio Converter is designed to accept a Digital audio signal and convert it to an Analog audio signal. Connect Digital Optical and Co-axial audio signals to the converter via SPDIF interface. Select the type of digital input signal (optical or co-axial) with a switch, then connect the Analog RCA R/L (Red/White) ports of the converter to your Analog amplifier’s Aux In R/L audio ports. Ideal for use with new technology Digital HDMI and DVI video/audio systems and older analog audio systems.
11th Dec, 2012
The HDMI 1 in 8 out Single CAT6 Splitter is designed to split one HDMI video signal into eight separate but equal CAT6 protocol line signals. It distributes each individual CAT6 protocol line signals via one CAT6 transmission cable (terminated by a CAT6 to HDMI converter: ID#906) and then connected by HDMI cable to each HDTV. The maximum distance for Standard Def transmssion is up to 45 metres, while for High Def it is up to 15 metres. The HDMI 1 in 8 out Single CAT6 Splitter is suited for Advertising displays, Educational displays and for quality video distribution to other rooms in your home.
04th Dec, 2012
HDMI v1.4 4in 2out Switch is the latest release version 1.4 switch designed to control 4 source HDMI signals to display onto 2 High Definition TV’s. Works perfectly with all 3D technologies and operates with PAL and NTSC video formats. Select one of four HDMI input sources to display to both HDTV’s at the same time. No more swapping cables and changing your setup just so you can watch different video sources. Sit back, relax and let the HDMI v1.4 4in 2out Switch do all the work for you.
23rd Nov, 2012
3G-SDI Splitter 1 in 4 out allows four (4) SDI monitors to be connected to one (1) SDI (Serial Digital Interface) source signal. Split one SD-SDI (standard def), HD-SDI (high def) or 3G-SDI (3G) signal into four equalised and reclocked signals for connection to four 3G-SDI monitors. The operating speeds for the 3G-SDI Splitter 1 in 4 out are 2.970Gb/s and 2.970/1.001Gb/s, 1.485Gb/s and 1.485/1.001Gb/s, 270Mb/s with transmission distances up to 100m for 3G-SDI, 200m for HD-SDI and 300m for SD-SDI. Easy to instal and operate, no software required, simply plug’n’play
16th Nov, 2012
Composite and S-Video to PC Converter is designed to upscale standard definition PAL and NTSC interlaced video signals to high definition PC resolutions of XGA, SXGA and UXGA. Display your DVD, VCR or Video Game CV (composite) or SV (super) video signal on VGA displays. Select the video input source, CV or SV, by push button and select the output resolution as XGA, SXGA or UXGA by slide switch. The Composite and S-Video to PC Converter is compact, yet powerful, with easy plug’n’play installation and setup, no software required.
09th Nov, 2012
HDMI Video and Audio Converters Clear out Sale offering very cheap pricing for high quality HDMI video and audio products. HDMI 4 way Switches and 8 way Splitters, PAL and NTSC Video to full HDMI Scalers and Digital~Analog Audio converters are clearing out at near cost price. Our 12 Months Warranty and 100% Money Back Guarantee still apply for any items sold during the HDMI Video and Audio Converters Clear Out Sale.
31st Oct, 2012
New 17 Inch Delta CGA EGA Multi-frequency to SXGA LCD Panel is now available as part of our RGB to VGA LCD Converter product range. Designed to retrofit old CRT monitors used in CNC Machinery and Arcade Game cabinets, the 17 Inch Delta CGA EGA Multi-frequency to SXGA LCD Panel operates with various CGA and EGA signal timings for upscale to display at SXGA resolution. Robust, solid construction with OSD menu for signal and image refinement.
09th Oct, 2012
HDMI Scaler and Format Converter is ideal for scaling your PC VGA signal or HDMI signal up or down to best suit your display monitor or HDTV. It will also allow you to change the video format of PAL or NTSC to the other, matching your video signal to any screen. Ideal as a simple plug’n’play solution to fix mismatched video players and HDTV’s.