All Products

New HDMI UHD 4K2K Scaler designed to accept a High Definition 1080p@24Hz video signal and upscale it to Ultra High Definition 4K2K resolution, or take UHD 4K2K resolution and downscale it to HD 1080p@24Hz. Integrate High Definition and Ultra High Definition equipment using the HDMI UHD 4K2K Scaler. Twin HDMI outputs give you one HDMI 'scaled' port for signal change, while the 'bypass' port outputs an UHD 4K2K or HD 1080p@24Hz signal, dependent on the attached display.

The HDMI HD UHD Video Entender is the solution for cascading and increasing the operating distance of any HDMI HD 1080p (High Def) and HDMI UHD (Ultra High Def) 4K2K video and audio signal. It amplifies and equalizes the signal, providing strong signal strength through an HDMI cable for a distance of up to 15 meters at HD resolutions and 10m at UHD resolutions. It can be cascaded up to 5 times and is capable of transmitting and receiving data from 340Mbps up to 10.2Gbps bandwidth rate, with CDR (Clock Data Recovery) ensuring no loss of data.

HDMI Matrix Selector 4 input : 2 output allows four HDMI sources to be directed to two HDMI display panels. Any HDMI source can be directed to one or all of the HDMI display panels. Ideal for use with HDMI devices such as DVD players, Set-top boxes, Game consoles and Multimedia centres.

The HDMI over CAT6 Transmitter and Receiver with IR and RS-232 transmits uncompressed video and audio signals over extended distances of up to 60m (1080p@50/60Hz) with no loss of quality in sound or visual. This device allows you to connect a HDMI source, such as a Blu-ray Player, and a RS-232 source, such as a computer hard drive, and transmit those signals through the Transmitter, which is connected to the Receiver via a CAT5e or CAT 6 cable over an extended distance (up to 60m) to a HDMI display source, such as a HDTV or projector. It also supports High Definition Audio and 3D signals, and the IR ports connected to both the Transmitter and Receiver allows the HDMI sources to be controlled via remote on both ends.

The HDMI over HDMI Cable - Repeater 40m, regenerates the incoming HDMI signal so it can extend its transmission range up to 40 meters without degradation (lower resolution signal can be transmitted further). For example, if you have a HDMI or DVI device, such a Blu-Ray player, connected to a HDTV, and would like to move your HDTV to another area for promotional or presentation purposes, you can connect the HDMI over HDMI Cable - Repeater to the HDMI device and the HDTV and it will act as an extension cord without losing any visual or sound quality. The repeater can extend up to approximately 40 meters.

The HDMI Power Inserter is designed to boost the distance an HDMI signal can be transmitted along an HDMI cable. Generally, household HDMI video equipment uses low power output for short 2~5 metre cable lengths. Over short cable distances, the HDMI signal can rapidly deteriorate to a stage where data is unusable by the receiving HDMI de-multiplexers. The HDMI signal deterioration becomes even worse when high definition resolutions like 720p, 1080i/p and 4K2K are used. Extend signal transmission distance and improve the HDMI signal quality when using the HDMI Power Inserter.

The HDMI Quad 4x1 Picture in Picture Processor is perfect for connecting and displaying up to four different HDMI video signals onto one HDTV. This can be achieved either as an individual display, or in various 'tile' formats, to best suit your application. The handy 'Picture-in-Picture' feature allows for Channel 1 to be displayed as the 'main' picture (full screen), while Channel 2 is displayed as a 'superimposed' picture over the 'main' picture. Perfect for use in Advertising and Education, Industry and Commercial applications and private Home Theatres.

The HDMI Quad 4x4 Video Wall Matrix Switch is designed to utilise four HDMI video sources, such as Blu Ray players, XBox, PS3, etc. and to display any or all of the four video sources onto four HDMI output LCD, LED or Plasma monitors/TV's. Display the desired video signal on to the monitors in different formats using various switch modes, including 'Video Wall' mode. Ideal for use in Advertising displays, Educational lectures, Commercial and Industrial applications and it is also perfect for integration with your Home Theatre setup.

This HDMI Repeater enhances your long distance HDMI signal transmission by decoding and re-encoding the signal to a new standard, capable of re-transmitting across another 12m without degradation or loss.

HDMI Repeater-Extender 1 input - 1 output is used to regenerate a Digital HDMI Signal for transmission over long distances. The repeater not only extends the signal, but also amplifies and equalises it, resulting in high quality video and audio.

HDMI Splitter - 2 input : 10 output allows one of two HDMI input sources to be displayed to ten High Definition TV's. It supports all HDMI compliant devices such as DVD players, Set-Top Boxes and Gaming Consoles, and is ideal for use in Home Theatres and Professional fields.

The HDMI Splitter 1 in 2 out allows an HDMI device such as a Blu-Ray player or personal computer (PC) to be split into two equal HDMI signals for connection to two monitors or projectors. The two HDMI signals are equal in strength and quality to the original signal.

Both the Video and Audio components of the HDMI signal are re-timed and re-shaped when split. If you have experienced a loss of quality with your HDMI product over long distance, then the HDMI Splitter 1 in 2 out can be used to regenerate the degraded HDMI signal and regain quality.

The HDMI Splitter 1 In 4 Out is a high performance device that allows a single HDMI source to be split into four separate and identical buffered HDMI outputs for multi-viewing purposes. Supports a wide range of PC and HDTV resolutions from VGA to UXGA and 480i/p to 1080i/p.

The HDMI Splitter 1 in 4 out uses a single HDMI video and audio source and displays the content across multiple outputs. The splitter allows one HDMI signal to be split easily into four equal HDMI signals for connection to fout HDTV's. For example, if you connect the splitter to your personal computer (PC) monitor output, you can then connect four monitors to your computer via the splitter and display the same content on each without losing any visual quality.

The HDMI Splitter 1 in 4 out, can connect one HDMI device to four high definition display units simultaneously. It is 3D compatible and offers HD video solution for a number of different situations for both personal and commercial use.

The HDMI Splitter 1 in 8 out, distributes one HDMI source to 8 HDMI displays. This allows for one HDMI compliant device, such as Blu-Ray players, Game Consoles (XBOX and Playstation) or personal computers to be connected to 8 HDMI displays, without any loss of display quality. This offers a simple solution to reach large audiences integrating displays and presentations, monitoring of security systems, information distribution and promotion, advertising, education and training. Ideal for distribution of high definition video for any circumstance.

HDMI Splitter-Extender 1 input - 4 output allows an HDMI device to be connected to up to four HDTV displays simultaneously without signal loss. The result is identical High Definition Digital HDMI Video and Audio reproduced on all of the connected HDTV displays.

The HDMI Switch 3 in 1 out allows up to three HDMI devices, such as a Blu-Ray player, personal computer or game console/s, to be connected to a single HDMI display, such as a HDTV. The Switcher allows the user to switch between each of the three sources by using the HDMI Switch remote. The switcher can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.

HDMI Switch 3 input - 1 output allows up to three separate HDMI input devices to share one HDTV display. It allows you to easily switch between the HDMI inputs to select your desired HDMI source for display on the HDTV.

HDMI Switch 3 input - 1 output Slimline allows up to three separate HDMI input devices to share one HDTV display. It allows you to easily switch between the HDMI inputs to select your desired HDMI source for display on the HDTV.

HDMI Switch 4 in 1 out can connect four HD sources, such as a DVD player, personal computer, or game console/s, to one HD display, such as an LCD or Plasma HDTV. Once all the devices are connected, you simply push the 'select' button, and the converter easily switches between any of the four HD sources inputs for display to your HDTV or HD projector.

HDMI Switch 4 input - 2 output allows up to four HDMI devices to be connected to the unit so that you can easily switch between them for display on your HDTV. The unit can also output the HDMI Signal to two High Definition TV displays simultaneously.

The HDMI Switch 5 in 1 out allows a single HDMI product, such as a HDTV, to access multiple HDMI sources, such as a DVD player, personal computer, or game console/s. The Switcher allows five HDMI devices to be connected to one HDMI compatible monitor or projector, and allows the user to switch between each of the sources by using the HDMI Switch remote. The switcher can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.

The HDMI to 3G SDI Single Output Converter allows HDMI sources such as Blu-ray Players or game consoles to be displayed on an SDI display and is useful for applications including smart home entertainment, smart building or any smart AV installation system and film studio display.

The HDMI to AV/S-Video Converter(Up to 4K) can convert HD HDMI digital signals into an analog Video Signal (CVBS) and L/R Analog audio signals, or S-Video signals.

New HDMI to CV/SV Scaler with HDMI Bypass (Apple Compatible) is designed to convert the digital input signal from an HDMI (or DVI) video source to analog Composite and S-Video output signals. The output analog CV and SV video signals can be selected in NTSC or PAL format and the HDMI to CV/SV Scaler with HDMI Bypass (Apple Compatible) also presents Analog L/R and Digital Co-axial stereo audio as outputs for connection to an external audio amplifier. The original HDMI signal is presented as a by-pass output for connection to standard HDMI equipment for monitoring purposes.

HDMI to DVI Converter with SPDIF Digital Audio converts digital HDMI video and audio to DVI-D digital video and SPDIF digital audio output. It enables you to split the digital HDMI source into it's video component via DVI and it's audio component via SPDIF. Supports HDMI PC and HDTV resolutions VGA to UXGA and 480p/i 1080p/i and digital SPDIF LPCM, Dolby Digital and DTS. Full incoming HDMI TMDS signal amplification and equalisation is performed before being presented as DVI-D video and SPDIF audio signal for transmission, ensuring excellent signal quality.

A 1.5M HDMI to HDMI cable.

A HDMI to HDMI 1M cable.

A HDMI to HDMI 2M Cable.

HDMI to HDMI Distributor Amplifier - 1 input : 8 output allows one HDMI input signal to be distributed to eight High Definition TV's. It supports all HDMI compliant devices such as DVD players, Set-Top Boxes and Gaming Consoles, and is ideal for use in Home Theatres and Professional fields.

This HDMI to HDMI HQV Scaler (CHQV-2H) is designed for the Blu-ray DVD players, Digital TV, Cable and Satellite Set-Top Box (STB), Internet Digital Media Adapters, Audio-Video Receivers and Digital Recorders markets. It gives you the freedom to enjoy the full benefits of high resolution video by recreating a cinema like experience in the comfort of your home. This device is a worthy addition to any home entertainment system. In addition, the HD inputs have been improved, allowing this Scaler Box to deliver crisp, stunning and noise free full HD video.