The Dual Input to 4K UHD+ HDMI Video Wall Processor accepts video input
from both HDMI and HDBaseT sources and reproduces the signal as a four
(4) screen Video Wall presentation.
The Dual Input to 4K UHD+ HDMI Video Wall Processor's ability to operate as a local HDMI, or a remote HDBaseT Receiver, allows for greater options and flexibility at installation. The ability to feed 48vDC PoH (Power over HDMI) to a compatible HDBaseT transmitter is one example.
Both the HDMI and HDBaseT video inputs accept up to 4K UHD 3840×2160@60Hz (4:4:4, 8-bit) resolution and reproduces the signal as a HD 1080p signal to the four (4) HDMI outputs in Video Wall mode. Audio signals from LPCM 2.0 ~ 7.1 are supported in pass-thru mode and the same applies with Bitstream and HD Bitstream audio formats.
It is very easy to setup the Dual Input to 4K UHD+ HDMI Video Wall Processor's operating parameters. Options include easy to access front panel buttons and OSD display, IR remote control or PC based Telnet and RS-232 command protocols.
Extra management options include EDID with Internal, External and User configurations, as well as advanced HDCP processing. This allows the unit to handle HD and UHD signals from any HDMI and HDBaseT source.
For more details about the Dual Input to 4K UHD+ HDMI Video Wall Processor, please click here.
You may order and pay for the Dual Input to 4K UHD+ HDMI Video Wall Processor via our simple 'Check Out' procedure, or if needed, contact our friendly Staff for further assistance. To contact us please telephone +61 (0)2 4968 9313, Fax on +61 (0)2 4968 9314 or email to email@example.com.