The advanced 19 Inch CGA EGA VGA to SXGA open frame LCD Panel accepts a wide range of RGB inputs of CGA, EGA, VGA to SXGA. Ideal as a replacement for older superceded CRT and LCD monitors, this LCD Monitor is made for CNC Industrial and Commercial applications.
The International standards of a VESA plug & play system allows the monitor to automatically adjust itself to the match the frequency of the user's device.
For users connecting this model to a computer it uses Display Data Channel (DDC) to send Extended Display Identification Data (EDID) to the computer, so the computer system can connect to the monitor and auto adjust.
When connecting to a loose wire source signal, or other style connector, use the supplied "CGA VGA In-line Adaptor" to adapt the source signal wiring harness to a 15-pin VGA D-sub output. Then use a VGA 15-pin D-sub cable to connect the adaptor output to the VGA input of the 19 Inch CGA EGA VGA to SXGA open frame LCD Panel. The adaptor can accept 5, 6 and 10 wire plugs.
The advanced 19 Inch CGA EGA VGA to SXGA open frame LCD Panel will auto-adjust to enhance the picture quality of the video source connected to it and a self-test function ensures all the operating parameters of the monitor are functioning properly.
To ensure maximum compatibility with input signals, 19 Inch CGA EGA VGA to SXGA open frame LCD Panel has more timing data and resolutions than other lcd panel. The resolution and timing information for the connected input device is displayed in the top bar of the OSD menu.
As part of the image repositioning function, an all important crush feature allows the operator to shrink the size of the image both horizontally and vertically, enhancing the appearance of the image over the full screen viewing area.
The clear graphics of the OSD (on screen display) menu simplifies the operation of the 19 Inch CGA EGA VGA to SXGA open frame LCD Panel, to easily change the LCD's operating parameters as required.
Power Supply for the 19 Inch CGA EGA VGA to SVGA LCD Panel can be 110VAC or 240VAC, regulated via a Universal Switch Mode Power Adapter to 12VDC 4.16A. (Please specify power cord required when ordering.)
The advanced 19 Inch CGA EGA VGA to SXGA open frame LCD Panel accepts a wide range of RGB inputs of CGA, EGA, VGA to SXGA. Ideal as a replacement for older superceded CRT and LCD monitors, this LCD Monitor is made for CNC Industrial and Commercial applications.
The International standards of a VESA plug & play system allows the monitor to automatically adjust itself to the match the frequency of the user's device.
For users connecting this model to a computer it uses Display Data Channel (DDC) to send Extended Display Identification Data (EDID) to the computer, so the computer system can connect to the monitor and auto adjust.
When connecting to a loose wire source signal, or other style connector, use the supplied "CGA VGA In-line Adaptor" to adapt the source signal wiring harness to a 15-pin VGA D-sub output. Then use a VGA 15-pin D-sub cable to connect the adaptor output to the VGA input of the 19 Inch CGA EGA VGA to SXGA open frame LCD Panel. The adaptor can accept 5, 6 and 10 wire plugs.
The advanced 19 Inch CGA EGA VGA to SXGA open frame LCD Panel will auto-adjust to enhance the picture quality of the video source connected to it and a self-test function ensures all the operating parameters of the monitor are functioning properly.
To ensure maximum compatibility with input signals, 19 Inch CGA EGA VGA to SXGA open frame LCD Panel has more timing data and resolutions than other lcd panel. The resolution and timing information for the connected input device is displayed in the top bar of the OSD menu.
As part of the image repositioning function, an all important crush feature allows the operator to shrink the size of the image both horizontally and vertically, enhancing the appearance of the image over the full screen viewing area.
The clear graphics of the OSD (on screen display) menu simplifies the operation of the 19 Inch CGA EGA VGA to SXGA open frame LCD Panel, to easily change the LCD's operating parameters as required.
Power Supply for the 19 Inch CGA EGA VGA to SVGA LCD Panel can be 110VAC or 240VAC, regulated via a Universal Switch Mode Power Adapter to 12VDC 4.16A. (Please specify power cord required when ordering.)
Unit Dimensions:
40.0 x 32.8 x 5.3 cm
Shipping Weight:
4.60 kg
Location:
NSW, Australia
Item Type:
RGB Open Frame LCD Monitors
Condition:
New
Warranty :
12 Months
Certificates :
CE, CTick, UL
19 Inch CGA EGA VGA to SXGA open frame LCD Panel - Product Details
Features:
Compact, durable metal casing.
Easy to adapt to CNC machines.
Function button control board can be placed in convenient position for access.
OSD menu for full display image management.
Input Modes: CGA/EGA/VGA to SXGA.
Resolution Range: 640 x 200 (CGA) to 1280 x 1024 (SXGA).
Auto Power Saver for when no signal is detected at inputs.
Fast Image display response time for when signal is detected at inputs.
Copyright 2001-2023, Converters.tv Pty Ltd. All rights reserved. Converters.tv is part of the Highway Group Pty. Ltd. network
Trademarks, brands, patents are the property of their respective owners. Use of this website constitutes acceptance of the Converters.tv User Agreement and Privacy Policy.