HDBaseT HDMI UHD Receiver and Scaler
New HDBaseT HDMI UHD Receiver and Scaler is designed to connect one input via HDMI to a video/audio source and the other input via HDBaseT CAT5e/6/7 cable carrying a different HDMI video/audio source. Either input can then be selected to be displayed on to two UHDTV's. Full support is given for HDMI HD, UHD and 3D video signals, plus PC signals up to WUXGA in resolution and with the ability to scale the received signals to best match your HDTV's. Digital audio is transmitted with the video signal, with a separate Analog L & R audio output for connection to external active speakers or an amplifier. The HDBaseT HDMI UHD Receiver and Scaler is ideal for use in Advertising, Commercial and Educational facilities, as well as Private Homes.
Our HDBaseT HDMI UHD Receiver and Scaler supports the latest HDMI v1.4 specifications, which supports PAL and NTSC 36-bit Deep Colour video up to HD 1080p, UHD 4K2K and all 3D formats. Support also for lossless digital audio formats like LPCM 2CH / 5.1CH / 7.1CH, Dolby Digital 2CH ~ 5.1CH, DTS 2CH ~ 5.1CH, Dolby TrueHD (pass thru) and DTS-HD Master Audio (pass-thru). LAN support and access is also catered for, with data support from 340Mbps up to 10.2Gbps.
The HDBaseT HDMI UHD Receiver and Scaler is very easy to operate, giving the User total control over input and output display parameters. Setup and control is achieved by a number of methods. The OSD menu of the HDBaseT HDMI UHD Receiver and Scaler can be accessed manually by buttons mounted on the front panel, or by using a hand-held remote controller. You can also access the OSD menu functions via a PC using RS-232, TelNET or WebGUI command controls. Change output resolution and display fine-tuning are just some of the functions available in the OSD menu.
The two video inputs to the HDBaseT HDMI UHD Receiver and Scaler are one HDMI port and one HDBaseT CAT5e/6/7 RJ45 jack. To these inputs you can connect any high-end Blu-Ray, DVD player or PVR device or game consoles like PS3 and Xbox. The HDMI input will connect via HDMI cable to the source, which is normally located in the same room. The RJ45 input will connect via CAT5e/6/7 cable to a HDBaseT transmitter, which can be located up to 100m away. Control of the CAT cable system is in-built allowing for RS-232 and bi-directional IR remote control of the attached sources and sinks (HDTV's), from either end.
Please feel free to visit the product webpage for more details by simply clicking here to enter. You will find full features and specification listings and you may also download the free User Manual for future reference. To make an order just "Add to Cart" and follow the easy 3 step procedure, or you are welcome to contact our friendly Sales Staff if you require further assistance. Our contact details are for Email: sales@converters.tv, for Telephone: +61 (0)2 4968 9313 and for Fax: +62 (0)2 4968 9314
