|
Used in conjunction with the DVI over CAT5 Transmitter, the DVI over CAT5 Receiver Box at 250m receives a DVI signal from the transmitter utilising Category 5 cable, and then outputs via DVI to your display. The DVI over CAT5 Receiver Box at 250m is used to extend the overall DVI signal distance by up to 250 metres without any signal loss or degradation.
The unit receives the HD image signal via CAT5, and outputs via DVI. One benefit of using Cat5 cable instead of other cable (eg HDMI) for long cable runs is its inexpensive price, making long cable runs more cost effective than ever before. It also offers L/R and Coaxial audio output ports for the transfer of analog/digital audio signals. Through the dedicated DDC port, the device also supports HDCP and CEC.
If the HDCP and DDC status are known for the source and display, then the following scenarios will apply:
-If source and display support HDCP, users just need to use 1 CAT5/6 cable.
-If source and display don’t support HDCP, users need to use 2 CAT5/6 cables.
-If display supports HDCP but source doesn’t, users just need to use 1 CAT5/6 cable.
-If source supports HDCP but display doesn’t, there’s no result.
The DVI over CAT5 Transmitter supports high definition input up to 1080P/UXGA, with output resolution following input resolution. The unit is suitable for anyone who wishes to further extend a DVI signal, and has many practical uses including digital signage, advertising, and home theatre integration. |
| Unit Dimensions: |
12.5 x 13.0 x 3.0 cm |
Shipping Weight: |
1.00 kg
|
| Location: |
NSW, Australia |
Item Type: |
CAT5/6 Cable Products |
| Condition: |
New |
Warranty : |
12 Months |
| Certificates : |
CE, CTick, UL |
Manual : |
 User Manual
(348.55 KB)
|
 |
|
Features:
- Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifications
- Supports Equaliser, Gain, CTI (Colour Transient Improvement) adjustment
- Supports high definition input up to 1080P/UXGA - output resolution follows input
- Easy to install and simple to operate
- Connect CAT 5 back to DVI without signal loss after 250 meters transmission
- Supports DDC/HDCP signal transferring through DDC cable
- Built-in EDID at transmitter
- Support both external Coaxial and Stereo Sound
Specifications:
- Transmitter Input port: 1 x DVI-I female port (Accept DVI-D signal only), 1 x Coaxial, 1 x L/R Audio
- Transmitter Output port: 2 x CAT5 RJ 45 8pin
- Receiver Input port: 2 x CAT5 RJ 45 8pin
- Receiver Output port: 1 x DVI-I female port, 1 x Coaxial, 1 x L/R Audio
- Resolution: HD- 480i/p 60, 576p 60, 720P 50/60, 1080i 50/60Hz, 1080p 50/60Hz, PC- 640 x 480=VGA72, VGA75, VGA85, 800 x 600=SVGA56, SVGA60, SVGA72, SVGA75, SVGA85, 1024 x 768=XGA60, XGA70, XGA75, XGA85, 1280 x 1024=SXGA60, SXGA75, SXGA85, 1600 x 1200=UXGA60, 1920 x 1200=Reduced blanking WUXGA
- Power Supply: 5V / 2.6A DC power supply
- Dimensions (mm): 125 x 130 x 30 / each
- Weight (g): 700 /each
- Material: Aluminium
- Colour: Silver
Power Supplies:
- Multi-Voltage Power Supply : 100-240VAC to 5V DC 2.6A Switch Mode Power Supply (Center Positive)
 |
|
Connects From : |
Connects To : |
- DVI - I (HDTV)
- Coaxial RCA S/PDIF
- Analog Stereo L/R
- CAT5 / CAT6 Cable
|
- DVI - I (HDTV)
- Coaxial RCA S/PDIF
- Analog Stereo L/R
- CAT5 / CAT6 Cable
|
Converts From : |
Converts To : |
- VGA (640 x 480)
- SVGA (800 x 600)
- XGA (1024 x 768)
- SXGA (1280 x 1024)
- UXGA (1600 x 1200)
- WXGA (1280 x 720)
- HDTV 480p
- HDTV 576p
- HDTV 720p
- HDTV 1080p
- HD 1080i
- WUXGA (1920x1200)
- HDTV 480i
- HDTV 576i
- CAT5/6 Protocol
|
- VGA (640 x 480)
- SVGA (800 x 600)
- XGA (1024 x 768)
- SXGA (1280 x 1024)
- UXGA (1600 x 1200)
- WXGA (1280 x 720)
- HDTV 480p
- HDTV 576p
- HDTV 720p
- HDTV 1080p
- HD 1080i
- WUXGA (1920x1200)
- HDTV 480i
- HDTV 576i
- CAT5/6 Protocol
|
- 1 x DVI over CAT5 Receiver Box at 250m
- 1 x Product Manual
- 1 x 100-240VAC to 5V DC 2.6A Switch Mode Power Supply (Center Positive)
|
