The HDMI v1.4 Over Single CAT5e/6 Cable requires only one CAT5e or CAT6 cable to connect TX to RX units for transmission of all Video, Audio and DDC information between video source and screen. The HDMI Transmitter (TX) is placed with the source equipment while the HDMI Receiver (RX) is placed next to your display. Additional IR input/output equipment connected to the TX and RX units allows for remote end control of source equipment. RS-232 control is also available.
Standard and High Definition HDMI resolutions the HDMI v1.4 Over Single CAT5e/6 Cable support are from 480p/i ~ 1080p/i @ 50/60/24Hz. The Output resolution equals The Input resolution. Transmission distance will vary depending on the size resolution you are wanting to display in. Standard Def display resolutions of 480p/i and 576p/i will easily transmit and display over 100m, while for High Def display resolutions of 720p and 1080p/i, the distance will vary dependent on the quality of the CAT5e/6 and HDMI cables used.
A very simple device to instal and setup, the HDMI v1.4 Over Single CAT5e/6 Cable product will enhance any professional or private home theatre installation. The Transmitter and Receiver units are powered by individual 5vDC power supplies. All inputs and outputs connections for RJ45, HDMI and IR and RS-232 control are clearly marked and accessible. For more information on features and specifications, or to order, then please enter here.
You are also welcome to contact our friendly Staff by Phone on +61 2 4968 9313, Fax on +61 2 4968 9314 or by Email using address
